Crack Repair by Metal Stitching and Metal Locking

RA Power Solutions undertakes engine block repair, cast iron crack repair, broken engine block repair by metal stitching, and metal surgery process. This process provides permanent crack repair solutions without the generation of heat. The main superiority of crack repair, engine block repair by metal lock and metal stitching process is that it can be performed onsite and avoiding the expensive cost of labour for disassembly of the equipment.
On-site metal stitching and metal locking save time and money. It is a handy method and it is widely utilized for heavy-duty plant and equipment, ship engine, heavy-duty forging presses, etc.

Our technicians undertake crack repair and damage engine block made out of cast iron or aluminum. Metal stitching and locking is a convenient method of repairing cast iron, engine block and can be called as the foremost method of crack repair as no heat is generated like in the welding method. We are always ready to provide metal stitching and metal locking services onsite anywhere. The notable point of this method is that it is a cold process.

Advantages of Metal lock and Metal Stitching process:

• There is absolutely no requirement of removing the engine block and sending it to the workshop for repair of crack or engine block repair, as this method can be performed onsite.
• We can send a team of engineers with portable tools to the site to execute the job of crack repair or repair of damage casting by metal surgery or metal locking process.
• We provide crack repair services to shipping companies all over the world.
• All technicians have valid CDC certificates and can travel to any destination in the world.

We provide onsite metal stitching and metal locking services all over the world in countries like  Greece, Moldova, Belarus, Australia, Austria, Belgium, Brazil, Cambodia, Colombia, Denmark, Ethiopia, Ghana, Haiti, etc.

Need crack repair services, contact us today.

For more information visit here:

repair of crack in cast iron casting

#repairofcrackincastironcasting

#crackrepairincastiron 

#damageengineblockrepairbymetalock

#castironcrackrepairbymetalstiching

Repair of crack in cast iron casting | Metal Stitching - marineengine

 

Damage engine block

Repair broken casting

Repair of Casting

Metal surgery under process

Crack in cast iron, aluminum, bronze components, or damage of casting now can be easily repaired by metal lock and metal stitching process. The process of metal stitching for casting repair is widely used, accepted in the business, and is proven to be a more strong process for repairing cracks in cast iron. The repair of a crack in cast iron heavy equipment is not successful by the welding process and in most cases results in rejection of the equipment and resulting in heavy losses. RA Power Solutions has been undertaking the repair of a crack in cast iron, bronze, and aluminum casting for the last 40 years. We are confident for jobs related to crack repair executed by us because we have a fully experienced technical team who are always ready to deliver the services all over the world. 

Visit here for more details:

repair of crack in cast iron casting

http://www.marineengine.in/blog/2016/12/21/metal-locking-and-metal-stitching/

Contact us:

Contact us: +91 9582647131
Email address: sales@rapowersolutions.com

Crankshaft Grinding at the Best Price - Marineengine

Crankshaft Grinding at the Best Price

 RA  Power Solutions undertake crankshaft grinding and crankshaft repair, Maintenance, and other various components with a 100% guarantee as well as we can provide services in many countries. 

In the case of high and medium-capacity diesel engines, the crankshaft gets damaged due to continuous running or gets worn out. This requires the repair of the crankshaft by highly precise equipment. Crankshaft grinding of compressor shaft, diesel engine, pump, and all rotatory equipment is possible now onsite without removing the crankshaft from the compressor casing or engine block. RA Power Solutions undertakes onsite crankshaft grinding up to 700 mm diameters.

RA Power Solutions are the portable, light-weight onsite #crankshaftgrinding machine manufacturing specialist. The machine is used for grinding of crankshafts of main and auxiliary engines, compressors, pumps, and for all applications. Rotor shaft, turbine shaft, alternator shaft can also be polished and grinding can be done in situ without removing the shaft from the casing.

Visit here for more details: http://www.marineengine.in/

And also you can contact us +91 9582647131 and rajshahani@rapowersolutions.com

Find the Spare parts of compressor | Pump spare parts at Latest Price

We are offering the spare parts of the main engine, auxiliary engine, air compressor, separator, turbocharger, pump, generator, etc which are established in an engine room of a vessel or a diesel power plant. 

Spare parts of compressor

We maintain a large stock of spare parts of compressor mainly of following types:-

1. ·  Reciprocating compressor
2. ·  Refrigerating compressor
3. ·  Oil compressor
4. ·  Axial Compressor
5. ·  Screw Compressor
6. ·  Centrifugal Compressor
7. ·  Turbo Compressor

All the compressor parts are thoroughly checked by the quality control department prior to dispatch. We are ISO 9001:2015AND Company and stand guarantee for the satisfactory performance of all the spare parts of compressors supplied by us.

We also extend services for on-site repair of compressor crankshaft without removing it from the crankcase. The stock of different make and model of pump spare parts is maintained. The popular make of pumps which are installed on the ship is maintained in our stock. We also have a tie-up with the leading manufacturer of pumps through which the spare parts can be arranged in a very short time with guaranteed performance.

Visit here for more details: http://www.marineengine.in/

And also you can contact us +91 9582647131 and rajshahani@rapowersolutions.com

 

Babbitt Bearing

White metal Babbitt bearings up to 1500 mm bore size are manufactured. We develop and manufacture the Babbitt bearing as per the drawing and the material specifications required. The white metal Babbitt bearings are centrifugally cast which ensures proper bonding with the bearing steel lining.  We have in house team of technicians to undertake inspection of bearings which includes ultrasound test for bonding, hardness test, dimensional inspection, etc.

Rebabbitting of old bearing is undertaken. We use the white metal of the same grade or the grade superior than the original which enhances the life and performance of the white metal bearing after rebabbitting is done. We also depute our technician to polish the shaft on which bearing is to be assembled.

White metal babbitt bearings and rebabbitting of old bearings is done for our clients based all over the world.



 

Wartsila Marine Engine Spares

Cylinder Head of Wartsila 12V32

We maintain large stock of Wartsila diesel engine and Wartsila generating sets. The Wartsila engines offered by us are completely refurbished as we have in-house facility to calibrate and repair all major components of Wartsila engine including crankshaft, cylinder heads, cylinder liners, connecting rods, camshaft, Alternator, etc.

Team of trained technicians undertake the refurbishment of the Wartsila engines and we stand guarantee for the satiafcatoryperformance. The turnkey job of transporting , erection and commissioning of Wartsila engine is undertaken.

Cylinder Liner After Honning

New and reconditioned spare parts of Wartsila engine are available in large stock. Major parts like crankshaft, cylinder heads, cylinder liners, connecting rods, camshaft, Alternator, etc. can be supplied in short notice. All the refurbished parts of Wartsila supplied by us are supported with calibration report and are guaranteed for the satisfactory performance. We regularly export spare parts of Wartisla to countries like UK, USA, South America, Indonesia, Singapore, Nigeria, Mexico, Qatar, Sudan, Saudi Arabia, Malaysia, etc.

 

Connecting Rod of MAK Diesel Engine

 

 

 

 

Connecting Rod Reconditioning

It is generally observed that connecting rod big end develops taper and ovality after continuous running. The small end bore bush which is commonly manufactured of bronze material gets worn out. Hence it is necessary to undertake periodic check of connecting rod.

RA Power Solutions have facility to inspect connecting rod on DRDO equipped boring machine. The connecting rod big end is re-bored to the standard size and the small end bush is replaced.

The straightness of connecting rods is also checked. The reconditioning of connecting rods and connecting rod calibration is also undertaken with guarantee.